Welcome Evenflow Installer

How To Install
play button.png
3 tone yelow triangle.png
Evenflow Energy Router installed on wall
Quick & Easy
Now you can install a 240 volt EV charging circuit, up to 50 amps, in an electrical service that is already at capacity without overloading the panel. If an existing load like an electric dryer or electric oven turns on, we automatically direct power away from the vehicle's charger. Later, when the owner wants to charge the EV, we send power back to the charging station.
Step 1: Install EVENFLOW between the electrical service panel and the existing load.
Step 2: Connect EVENFLOW to wire from the service panel to existing load.
Step 3:  Install new wire from EVENFLOW to the new EV charging station.
You're done, you don't even need to add a circuit breaker.
Evenflow Energy Router installed with minimal wiring
Great For Condos
EVENFLOW is particularly great for condo and apartment buildings.
As contractors, we know just how difficult it can be to install anything in a shared building. Many of our customers wanted to buy an EV but lived in a condo which often made it impossible. They weren't able to install a charging station since they weren't allowed to add any mechanicals to the shared utility room and the service in these units is generally limited in both size and capacity.
electrical room.jpg
Enter EVENFLOW! If the owner's small service panel is inside his/her unit, at just 7.5 inches by 10.5 inches, you can install EVENFLOW in a less conspicuous location, like a closet. Then just bring wire to it from the panel, an electric dryer, and the EV charging station. The condo owner gets to have an EV and you get a day or two of install work that otherwise would not have existed.